“HOW TO” Replace an SD card
Should you ever be asked by the SensorFlow team to replace a gateway’s SD card, please follow the steps below.
Your Gateway should have the power cable plugged-in in one of those ways, either on the side of the Gateway or directly to the core. It is either a barrel plug cable or a Mini USB cable. It can be plugged in like any of the below pictures.
Step 1: Start by unplugging the power cable from the Gateway or from the electric socket, whatever is easier so the gateway is powered Off.
Step 2: Remove the old SD card from the gateway.
Step 3: Insert the new SD card.
Step 4: Plug the gateway back in so it gets powered On.